The Blacksmith

The Blacksmith is where you will acquire most of your weapons. Except for the very specialized weapons, such as guns, bows, and gloves, you will find no ready-made weapons. Instead you must go to the blacksmith and tell the blacksmith what you want made. This can seem daunting at first, but understanding how to do this will allow you to make any kind of weapon you want. 

1) How To Use The Blacksmith

Before you can start to use the blacksmith, you will want to understand how to do so. The more you understand, the easier the process will be and the better of a weapon you will be able to have made.

1.1) Reading This Page

The first thing to learn is how to read the information on this page. This page is divided into Blades and Handles.

• Blades: Blades are the business end of your weapon, the main part of your weapon, if you will. Despite being called a blade component, it doesn't need to be sharp or made of metal. It just needs to only be used to do damage. All blade components must be attached to a handle component. Blades also have Blade Enhancements and Blade Materials. Blade Enhancements are enhancements to your blade, and blade materials are the materials used to make your blade. 
• Handles: Handles are components used to hold your weapon. Blades are attached to handles, but handles do not require a blade. A staff, for example, is simply a long handle component, typically without a blade. But don't let that little fact stop you from adding a unique small blade to it. Handles also have handle enhancements and handle materials. 

Each component is listed on a table with the following fields: Item, Attack, Parry, Range, Hit Chance, Power Cost, Weight, Space Taken, Other Information, Build Time, and Cost. Most of these should already be understood, but below are a few that might be new to you. 

Power Cost: this is the cost of the Power Stat that the component will require. 

Build Time: this is the time it takes to make that component. It is listed in hours. 

1.2) The Basics of Making A Weapon

To make a weapon you will be adding together all of the items of your blade, all of the items of your handle, and then adding those two completed components together. Simple, right? No? Then let me explain further.

1.2.1) First Step: Making a Blade Component

The first step to making a weapon is likely going to be making a blade component - unless you want a staff or rod. Anyways, you simply need to add the values of the material to the blade, and any enhancements. For the most part, it is simple addition, but some components have multipliers instead of flat values. No worries, it isn't that difficult. Lets go over it one "item" at a time.

First you need to decide which items you want to make use. Until you get a handle on how to do things, you should start simple. Lets start with making a simple Steel Long Broad Sword. For the blade we will need the following: Attack Type, Blade Length, Blade Placement - End, and Sword Shape Blade. We will also be using the Broad Blade Enhancement and the Steel Material. 

Attack Type: This is important, as you need to assign an attack type to your weapon. Every weapon you make must have an attack type. Even staffs. Since we are making a sword, we will get the slashing attack type. The only information we need is the slashing information in Other Information, and the cost of 1.00. 

Blade Length: This is the length of your blade. It is sold in components of 3 inches. A typical long sword is 33 inches, so we will need 3 of these. Lets record the information together. We will only record what we need to know.

Hopefully you understand what is shown above. Since we wanted 33 inches, we had to buy the blade length 10 times. The first row shows what the initial values were, the second row shows the total values of all 10 put together. 

Blade Placement: Next we get to place where the blade will go on our handle. A blade must always be on a handle unless it is something like a throwing star. Anyway, we want a sword so we will get the Blade Placement - End that increases the range by + 0.25 and costs 1.50.

Sword Shape Blade: This one is probably self explanatory, but we need to tell the blacksmith we want the blade shaped like a sword blade. This gives us the following

Broad Blade Enhancement: This will increase the width of our blade which will give us a heavier sword. 

Steel Material: This is the material we will make our blade from.

Ok, lets put it all together to get our sword blade...

I've included how to add together the values in the Completed Blade so you can hopefully see how we have come up with our completed blade values. Multiplying happens after addition. Hopefully this makes sense.

1.2.2) Second Step: Make The Handle

Now lets make the handle that this blade will attach to. We will need the following: Handle 6 inches, Handle Straight, Twisted Handle Enhancement, Elgin Material, and Black Maple Material. We will not need attack type since we are using a blade with this handle. 

Handle Length 6 Inches: We only need a 6 inch handle since this is a sword, so this will be simple. 

Handle Shape Straight: We want a straight handle for the sword.

Twisted Handle Enhancement: This enhancement lets us basically make two handles and twist them into one. This lets us use two materials, which can give us added effects. The attack and parry values are the average of the two, but the extra effects of the materials will make it worth it.

We will finally add in the values of both wood materials since we are using a twisted handle. Ready? Lets do this!

1.2.3) Third and Final Step: Combine Blade with Handle

Now we can combine the completed blade with the completed handle to get the completed weapon

It may look confusing at first but once you do it a couple times, it is really not so difficult. Simply remember the following:

• Always add before you multiply: If something you are adding to your component has a multiplier, you will multiply that against everything you added to that component. For example, with the sword blade component above we added together the blade shape and steel material attack values and took that total to multiply against the broad blade enhancement attack value. That is because the enhancement would enhance the total attack value of that blade. 
• Round Up Attack, Parry, Range, Hit Chance, and Power Cost. These values cannot have decimals. We want to round up even if it is only a 0.1 because we do not want to lose anything. 
• You need a handle with a blade (in most cases), but you do not need a blade with a handle.
• You must increase the total cost by 25% (x1.25) to pay the blacksmith for labor and taxes. Certain settings may add an additional fee.

Hopefully you understand somewhat how this all works. If you have any trouble, please ask for help.

2) Blades

2.1) Blade Enhancements

2.2) Blade Materials

3) Handles

3.1) Handle Enhancements

3.2) Handle Materials